The abtanks 50L rotovap EXRDS Series recovers solvents efficiently and fast with two times the surface area for condensing and twice the recovery volume. Our EXRDS series explosion proof rotary evaporator is an explosion proof evaporator with brush-less motors and enclosed internals to prevent any flammable / explosive material from touching the internals via seals.
This unit provides consistent and repeatable results at an affordable price. With dual condensers and dual receiving flasks made of GG-17 High Borosilicate Glass， all pieces have been designed for efficient use of surface area and higher capacity's. This means faster recovery without compromising quality. Our evaporators come standard with safety features such as over-temperature shut off and dry-run protection. All valves and ports are high efficiency allowing a continuous feed of material as well as draining the receiving flask without breaking vacuum.
No expense has been spared with these evaporators， yet we crush the market on pricing to provide great value at a low cost. Our evaporators are the best value on the market and each one comes with fantastic customer service， local product support and a 1 year warranty.
** Notice **
NOT Compaible With 208V Power Input
(Acceptable range: 219V - 253V)
NOT Compaible With 208V Power Input
(Acceptable range: 219V - 253V)
NOT intended for 24-hour operation， maximum operation time is 16 hours.
| EXR-1050 DC SPECIFICATIONS |
| •Glass Material: GG-17 Borosilicate Glass |
| •Evaporation Flask Capacity: 50L |
| •Collection Flask Capacity: 20L |
| •Rotary Speed: 20-120RPM |
| •Bath Temperature Range: Room Temp to 180°C /356°F |
| •Lifting Mechanism: Electric |
| •Power Requirements: 220-240V 50-60Hz 30A Single Phase |
| •Power Continued: HARDWIRED TO QUICK DISCONNECT PANEL |
| •Temperature Control Accuracy: +/-1°C |
| •Motor Wattage: 250W |
| •Heater BTUs: 22，000BTU |
| •Achievable Vacuum: 399.9Pa |
| •Evaporating Capability: Water≥13L/H; Alcohol≥27L/H |
| •Water Bath Volume: 77L |
| •Dimensions: 52'L x 45'W x 84'H |
| •Condensing Surface Area: Main: 0.91㎡ x2; Auxiliary: 0.52㎡ x2 |
| •Speed Regulation: Digital Step-Less |
| •Vacuum Barb: 13.3MM |
| •Condenser Barb: 15.5MM |
| PACKING LIST | |
| abtanks 50L EXR-1050 Rotary Evaporator Base | 1 set |
| Main Condenser | 2 pcs |
| Auxiliary Condenser | 2 pcs |
| 50L Boiling Flask | 1 pc |
| 20L Receiving Flask | 2 pcs |
| 50L Flask Cover | 1 pc |
| Four-Way Bump Trap | 1 pc |
| Vapor Duct with Seal (Pre-Installed) | 1 set |
| PTFE Vacuum Sealing Kit (Pre-Installed) | 1 set |
| Glass Vacuum Port with PTFE Valve | 6 sets |
| Glass Feeding Tube with PTFE Valve | 2 sets |
| PTFE Feeding Tube Extension Hose | 1 pc |
| Vertical Stand | 2 pcs |
| Vacuum Gauge | 1 pc |
| Support Ring | 4 pcs |
| Rubber Strap for Condenser | 2 pcs |
| Clamp with PTFE Gasket | 16 sets |
| Evaporating Flask Screw Aid | 1 pc |
| Allen Key | 2 pcs |
| 63A Fuse | 1 pc |
| Screw Nuts for Clamps | 2 pcs |
| Springs for Clamps | 2 pcs |
| Gasket for Clamps | 4 sets |
| Vacuum Hose | 10ft. |
We ship all glassware products with additional care， but sometimes they arrive broken. If glassware arrives broken， please contact us within 3 days of receiving your product and we will either send you a brand new piece or send you a refund! Any glassware broken after delivery voids all warranties. Thank you for understanding!
1 Year parts and labor warranty included. Does not include glassware.
For Technical Support， Questions， or Other Issues Please Email or Call Us!
