abtanks Recertified 20L Rotary Evaporator RotoVap RE-1020 (ETL Certification to UL and CSA Standards)
*This is a recertified item*
*90 day warranty*
The abtanks 20L RE Series Rotovap Machine recovers solvents efficiently and fast. This unit provides consistent and repeatable results at an affordable price. With GG-17 High Borosilicate Glass， all pieces have been designed for efficient use of surface area. This means faster recovery without compromising quality. Our evaporators come standard with safety features such as over-temperature shut off and dry-run protection. All valves and ports are high efficiency allowing a continuous feed of material as well as draining the receiving flask without breaking vacuum.
No expense has been spared with these evaporators， yet we crush the market on pricing to provide great value at a low cost. Our evaporators are the best value on the market and each one comes with fantastic customer service， local product support and a 1 year warranty.
** Notice **
NOT Compaible With 208V Power Input
(Acceptable range: 219V - 253V)
NOT Compaible With 208V Power Input
(Acceptable range: 219V - 253V)
NOT intended for 24-hour operation， maximum operation time is 16 hours.
| RE-1020-ETL Specifications | |
| Glass Material | GG-17 Borosilicate Glass |
| Evaporation Flask Capacity | 20L |
| Collection Flask Capacity | 10L |
| Rotary Speed | 20-120RPM |
| Bath Temperature Range | Room Temp to 180°C (356°F) |
| Lifting Mechanism | Electric |
| Power Requirements |
220-240V 60Hz 30A Single Phase 5000W L6-30P Plug Installed |
| Temperature Control Accuracy | +/-1°C |
| Motor Wattage | 100W |
| Heater BTUs | 17，000BTU |
| Achievable Vacuum | 0.0033 Mpa | 25 Torr | 25，000 Micron |
| Evaporating Capability | Water≥5L/H |
| Alcohol≥12L/H | |
| Water Bath Volume | 41L |
| Dimensions | 43'L x 30'W x 80'H |
| Condensing Surface Area | Main: 0.8m² |
| Auxiliary: 0.39m² | |
| Speed Regulation | Digital Step-Less |
| Vacuum Barb | 13.3mm |
| Condenser Barb | 15.5mm |
| RE-1020-ETL Packing List | |
| Item | Quantity |
| 20L RE-1020 Rotary Evaporator Base | 1 set |
| Main Condenser | 1 pc |
| Auxiliary Condenser | 1 pc |
| 20L Boiling Flask | 1 pc |
| 10L Receiving Flask | 1 pc |
| Three-Way Bump Trap | 1 pc |
| Vapor Duct with Seal (Pre-Installed) | 1 pc |
| PTFE Vacuum Sealing Kit (Pre-Installed) | 1 pc |
| Glass Vacuum Port with PTFE Valve | 4 sets |
| Glass Feeding Tube with PTFE Valve | 2 sets |
| PTFE Feeding Tube with Extension Hose | 1 pc |
| Vertical Stand | 1 pc |
| Vacuum Gauge | 1 pc |
| Support Ring | 2 pcs |
| Rubber Strap for Condenser | 1 pc |
| Clamp with PTFE Gasket | 7 sets |
| Evaporator Flask Screw Aid | 1 pc |
| Allen Key | 2 pcs |
| 32A Fuse | 1 pc |
| Screw Nuts for Clamps | 2pcs |
| Spring for Clamps | 2 pcs |
| Gasket for Clamps | 4 sets |
| 3oz. Vacuum Grease | 1 pc |
| Vacuum Hose | 10ft |
>INTERTEK CSA CERTIFICATION<
>INTERTEK UL CERTIFICATION<
We ship all glassware products with additional care， but sometimes they arrive broken. If glassware arrives broken， please contact us within 3 days of receiving your product and we will either send you a brand new piece or send you a refund! Any glassware broken after delivery voids all warranties. Thank you for understanding!
1 Year parts and labor warranty included. Does not include glassware.
For Technical Support， Questions， or Other Issues Please Email or Call Us!
